New KWA 2009 Lineup

[JiNX]

Here's some pics of the new 2009 KWA lineup. These guns have a ton of improvements to them inside and out making these worth every penny. I support these guns 110%.

M16 SR12
www.airsoftgi.com/product_info.php?products_id=5634&osCsid=u58lhsro6lvo2gpkvflapigag1

SR10-i'll be picking this baby up!
www.airsoftgi.com/product_info.php?products_id=5633

SR5
www.airsoftgi.com/product_info.php?products_id=5632

M4 RIS
www.airsoftgi.com/product_info.php?products_id=5631

MP7
www.airsoftgi.com/product_info.php?products_id=5635

Information
Internals:
-Version 2 gearbox with a epic uber amount of reinforcement in the front and EVERWHERE and it uses a new kwa 2GX gearbox shell
-Uses 6 9mm ball bearings that are simply indestructable
-Uses
-Contains a fully heat treated sector gear that is 5mm in width (that is .92mm thicker than even Systema torque up gears!!!!)
-Contains heat treated anti-reversal latch
-Contains new piston that is uber reinforced and is also ported and has a heat treated metal plate and the first tooth is uber reinforced and uses new material
-HAS A 2G bucking that is very close in performance to the fire fly bucking
-New improved Hop Up C clip to get way better compression and to prevent air leaks
-Has a 6.05mm =/- .03mm 509mm long barrel
-Super awesome motor
-Reinforced trigger post (already fixed for new updated KM4 and KM16 models for 2009)
-M130 spring

Externals:
-Fiber Reinforced stock
-New HEAT SINC MOTOR PLATE LIKE G&G GUNS
-NEW 1 PIECE OUT BARREL
-Machined 12" SR25 style RAS WITH NO WOBBLE AND" IS STRONG ENOUGH TO STAND ON" (tests performed by Kwa and yes I did typed strong enough to stand on quote from Radix from Kwausa Forums and Radix is a kwa staff member
-Flip Up iron sights
-Laser Ingraved Kwa KM16 SR12 on RAS (not sure if it is)
-Laser Ingraved New Kwa logo and KM16 SR12, Cal. 6mm, and Serial number (might be a special one for each gun)
-Matte Gray/Black gun body that is very VERY nice looking and has a great finish
-New Magazine finish is now gray to match better with new body color and looks like the same color as the G&G high cap mags and the mag is a 350 high cap mag
-Metal nut insert for pistol grip bottom

Performance:
-420 fps with m130 Spring ("results may vary depending on bb and chrono" - Kwa)
-20 rps (1200 rpms) test by Kwa with a 11.1v 1500 mah lipo

Specifications: (straight from Kwa Usa)
Overall Length = 39.5" [100.33 cm]
Outter Barrel Length = 495.3 mm
Barrel thread = 14mm* [Counter clock wise]
Inner Barrel Length = 509 mm
Inner Barrel Diameter = 6.05mm
Magazine Capacity = 350 Rounds Hi-Cap magazine included
Caliber = 6mm Airsoft BB
Velocity = 420+ fps** with .20 gram BB's
Rate of Fire = 20+ rps***
Weight = 6.5 lbs.
Power = 8.4V, 9.6V NiMh Battery, or 7.4V, 11.1V Lithium Polymer or Lithium Manganese Battery [Maximum 11.1 V, 20A continuous]

Special Features: (straight from Kwa Usa)
KWA 2GX Gearbox
KWA 2G High Performance Bucking
Machined, extruded aluminum 12" forend tube with four Picatinny rails
Fiber reinforced full stock with battery compartment
Full metal alloy receivers
Flip up adjustable front and rear sights
Flat top receiver
Free Float Rail Adapter System
Semi and Full Auto selective fire
Adjustable Hop-up
Optimized for range