|
|
Post by Stash on Jun 25, 2008 17:13:01 GMT -5
Hey buddy any word on the M733?? No hurry just wondering. Hey also where are those pics from last sat?  |
|
|
|
Post by EasyCheez on Jun 26, 2008 21:42:23 GMT -5
I'll edit them and throw them on my photobucket account... look for the link on the ruff ryders website.
And, dude, what happened to your M733? I wasn't aware that anything happened... I am worried that the hop-up on my MC51 is shot, I had it cranked all the way as high as it'll go and the shots were still not curving upwards (hell, at that point they probably should have been jamming). Thank God my UZI is up and running... I'm not in any rush to get the MC51 back.
|
|
|
|
Post by JiNX on Jun 27, 2008 16:31:17 GMT -5
It's been a busy week, just finishing up getting a friend of Natalie's moved in our house, but I have been working on your guns when possible.
Stash- Gun runs great, I shimmed your gun so it runs smooth and replaced your plastic spring guide with a metal one I've had lying around. Your ROF is too much for mags to keep up with. I would recommend a timing clip so your tappet plate allows bb's to feed a tad earlier which I think would allow smoother bb flow. Right now they will feed but up to a certain point 15-25 rounds then it's a couple at a time until you stop pulling the trigger but will start back up once your in full auto. Your ROF is still 19-21 BPS. Oh and I lubed the gearbox too. You had no lubrication in there.
Cheez-I'm in the process of taking yours apart today. I'll find out why your accuracy is kaput.
I'll link my Photobucket account on here soon also.
|
|
|
|
Post by Stash on Jun 27, 2008 16:53:29 GMT -5
Dude thx!!!!! I will have to shoot really short bursts until I can get some more mags.
|
|
Vegas
Seren
Praise be to the Lord, my Rock, who trains my hands for war, and my fingers for battle. Psalms 144:1
Posts: 175
|
Post by Vegas on Jun 29, 2008 13:46:19 GMT -5
QUICK NOTE: Not to sound like a know-it-all or anything but since i am a german student i feel it is my duty to correct an error in this post Right--- Kaputt(adj.) Broken Wrong--Kaput(?) ?? yeah.. i realize i sound like a nerd right there. ha |
|
|
|
Post by JiNX on Jul 1, 2008 15:57:50 GMT -5
Both of your guns are ready for pickup or delivered at the next game.
Easycheez-I took it apart and put back together the barrel unit and replaced the hopup and the bb's "hop up" at around 50-60 feet. I would also suggest a higher spring 330-350 FPS, (I think PDI makes one) and I would defiantly put a longer barrel in yours.
|
|
|
|
Post by EasyCheez on Jul 1, 2008 17:51:03 GMT -5
Ok... That was so freaking weird. I had the hop-up set all the way up and it was acting as if I had set it as loose as it'll go. Oh, well... Thanks for fixing it!
And, a higher spring? My gun chrono'd at around 370fps at the Jamalama and when you brought your chrono out to the field... What is it chronoing at now?! It's an m110 spring in there now.
|
|
|
|
Post by EasyCheez on Jul 5, 2008 11:54:22 GMT -5
Jinx, update, I wanted to let you know that I have been digging around and found some MC51 info. I am going to get a tightbore barrel for the MC51, as planned, but I guess the MC51 has THREE barrels. there's an outer barrel, the actual inner barrel that the rounds travel through, and then there is a third barrel between the two. The stock Marui middle barrel is a little loose-ish so PDI makes a middle barrel that fits tight like a glove that helps keep that inner barrel steady for more accurate shots.
Score! With these upgrades it might be time to get that new hop-up bucking installed, too.
|
|
|
|
Post by JiNX on Jul 5, 2008 23:04:26 GMT -5
Sounds awesome Cheez! I re-cronoed it and it's at 330-359 FPS.
|
|
|
|
Post by EasyCheez on Jul 5, 2008 23:36:52 GMT -5
Wow... Wonder why the fluctuation?
|
|
